Panasonic KX-TDA0484 Programming Manual

Also see for KX-TDA0484: Getting started Programming guide

Contents

Panasonic KX-TDA0484 Programming Manual Manual pdf 28 page image

2.2 Programming28 Programming GuideParameter DescriptionsThe parameters indicated with "*" must be changed while the VoIP Gateway Card is in the "STOP" status (see"2.3.1 Status Control"). The changes do not have to be followed by a reboot to become effective.Hunt GroupThe parameters below are used to assign VoIP gateway ports 1 and 2 to the hunt groups.For details, refer to "Detailed Explanations".Hunt Pattern EntryThe parameters below are used to create hunt patterns.For details, refer to "Detailed Explanations".Parameter Default Value Range* Port1 Hunt group 1 Hunt group 1,Hunt group 2* Port2 Hunt group 1 Hunt group 1,Hunt group 2Parameter & Description Default Value Range* Hunt Pattern No.Specifies the number for the hunt pattern to be created.When changing the current settings of an existing huntpattern, first delete the hunt pattern and then re-create withnew values.No default 1 to 16* Receive Leading NumberSpecifies the leading digits in received numbers by which todetermine the hunt group to direct incoming calls.For example, to direct incoming calls with numbers startingwith "9", specify the number "9" in this parameter. Likewise,to direct incoming calls with numbers starting with "1", specifythe number "1".However, if you want to direct incoming calls with numbersstarting with "950" and "951" to separate hunt groups, it isnecessary to make 2 hunt patterns with respective numbers,"950" and "951".No default Max. 30 digits* Hunt Group (Priority1)Specifies the hunt group to which incoming calls are directedfirst.1 1, 2* Hunt Group (Priority2)Specifies the hunt group to which incoming calls are directedwhen the VoIP gateway port assigned to Hunt Group(Priority1) is busy.- 1, 2, - (disable)