Document Version: 2006-07IP Softphone Edition of PC Phone SoftwareQuick Reference Guidefor IP SoftphoneModel No. KX-TDA0350Thank you for purchasing the Panasonic PC Phone Software, KX-TDA0350.Please read this manual before using this product and save for future use.This manual is designed to provide instructions for installing the IP Softphone software on yourpersonal computer.Table of ContentsSystem Requirements............................................................................................................... 1Introduction................................................................................................................................ 2Conditions .......................................................................................................................................... 2Installing the IP Softphone Software ....................................................................................... 3Uninstalling the IP Softphone Software .................................................................................. 5Starting and Registering the IP Softphone Software ............................................................. 5Upgrading the IP Softphone Software................................................................................... 10Features List ............................................................................................................................ 12System Requirements• Microsoft® Windows® XP Professional SP2• Minimum Requirements (for installing the IP Softphone only)CPU: Pentium® M 1.86 GHzRAM: 512 MBHDD: 50 MB available space (when installing)Display: XGA (1024 x 768)LAN (Ethernet): 100BASE-TPeripheral Devices: Sound Board, Speaker, Microphone, CD-ROM drive• PBX: Main Processing (MPR) software version of the Hybrid IP-PBX must be as follows:KX-TDA100/KX-TDA200: PMPR Software File Version 3.0000 or laterKX-TDA600: PLMPR Software File Version 3.1000 or later• IP-EXT card: Local Processor (LPR) software version of the IP-EXT card installed in thePBX must be as follows:PIPEXT Software Version 1.001 or laterPVOIPEX Software Version 1.011 or later• Network Settings: Network VoIP specifications must be as follows:CODEC: G.711 (G.729 is not supported.)RTP sampling rate: 20 msTrademarks• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in theUnited States and/or other countries.• Pentium is a trademark or a registered trademark of Intel Corporation or its subsidiaries in the UnitedStates and other counties.• All other trademarks identified herein are the property of their respective owners.• Screen shots reprinted with permission from Microsoft Corporation.