General Features196 Features GuideOutside Line GroupDescriptionOutside lines can be grouped into up to eight outside line groups (for example, WATS, DDD,FX services, etc.). This allows extensions to call outside parties without designating a specificoutside line, since an outside line is automatically selected from the designated outside linegroup. All outside lines belonging to an outside line group follow the assignment determinedfor that outside line group. A list of assignments for each outside line group is shown asfollows:• The destination of Intercept Routing• Disconnect Time• Flash Time• Host PBX Access Code• Pause Time (used in Speed Dialing and Flash)Conditions• Each outside line can only belong to one outside line group.• Outside lines in an outside line group are selected uniformly if all lines belong to the samesystem.• If System Connection *1 is established, an outside line group can include outside lines in bothsystems. In this case, an outside line is first selected from the user's system. If all lines inthe user's system are in use, a line in the other system is selected.Programming Guide References• [100] Flexible Numbering• [401] Outside Line Group Assignment• [409-410] Intercept Extension —— Day / Night• [411] Host PBX Access Codes• [412] Pause Time• [413] Flash Time• [414] Disconnect TimeFeatures Guide ReferencesNoneUser Manual ReferencesNot applicable.*1 Available for the KX-TD1232 only.
