Features 3-313 Features IIntercept RoutingProvides automatic redirection of incoming outside calls via the DISA or UCD feature. TheIntercept Routing feature works in the following 2 cases.1) When nothing is dialed after a dial tone or OGM is sent to the caller. (The DISA featureonly)2) When the call is not answered within a programmed time. This is called InterceptRouting – No Answer (IRNA).• Required System Programming[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch[507] DISA Intercept Mode[508] DISA Ringing Time Before Intercept[509] DISA Ringing Time After Intercept[510] DISA No Dial Mode[523] UCD Busy Mode[524] UCD Intercept Mode[525] UCD Ringing Time Before Intercept[526] UCD Ringing Time After Intercept• Related Feature ReferencesDirect Inward System Access (DISA), Uniform Call Distribution (UCD)+Intercom CallingAllows an extension user to make a call to another extension.• An extension number and a name can be assigned in programs [009] and [604]. Ifassigned, they will be shown on the display proprietary telephone during an intercomcall.• The DSS buttons permit a proprietary telephone user one-touch access to an extension.The DSS button can be assigned to a flexible CO button in the Proprietary TelephoneSettings.The DSS buttons on the DSS console can also be used.• Required System Programming[009] Extension Number Assignment[604] Extension Name Setting• Operating Instructions References1.2 Proprietary Telephone Settings, “Customizing the Buttons on Your Telephone”,DSS (Direct Station Selection) Button1.3 Making Calls, “Intercom Calling”1.9 DSS Console Features, “Initial Settings”, Extension Number Assignment+!!
