System Programming 4-594.2 System Programming [506]-[507]Selects the operation when a called extension or all called extensions in an extension groupenabled in program [100] “Hunting Group Set” via the DISA feature is/are busy.Disconnect, Call Waiting or DISA2 is available.Disconnect: The call is disconnected after the busy tone.Call Waiting: A call waiting tone is sent to the called extension or first called extensionin the hunting group.DISA2: OGM2 is sent to the caller and the system waits for another destinationwhen the first destination is busy.Default Disconnect• Program [502] “OGM Mode Selection” should be “MODE2”, if “DISA2” was selected inthis program.• Feature ReferencesSection 3, FeaturesDirect Inward System Access (DISA), Outgoing Message (OGM)[506] DISA Busy Mode05 NEXT6 STORE ENDSELECT(Disconnect/Call Waiting/DISA2)Selects the operation when a called extension or extension group via the DISA feature doesnot answer a call within the length of time programmed in [508] “DISA Ringing Timebefore Intercept”. Intercept or Disconnect is available.Intercept: The call is redirected depending on [408]-[410] “Flexible RingingAssignment–Day/Night/Lunch” (Intercept Routing – No Answer feature).This is useful for business use. For example, the call is forwarded to theoperator or a Voice Processing System automatically.Disconnect: The call is disconnected. This is useful for users who do not want toforward the call, for example, to a home.Default Intercept• Feature ReferencesSection 3, FeaturesDirect Inward System Access (DISA), Intercept Routing, Voice Mail Integration[507] DISA Intercept Mode05 NEXT7 STORE ENDSELECT(Intercept/Disconnect)+!!+
