The system supports the day, night and lunch operation modes. The system operation formaking and receiving calls can be different for the day, night and lunch modes. The systemoperation for toll restriction can be arranged to prevent unauthorized toll calls for each mode.Time service can be set automatically or manually by program [006].Changing the Day/Night/Lunch ModesThe day, night and lunch modes can be changed either automatically at an assigned time inprogram [007] or manually by the operator or manager at any desired time.• The lunch mode interrupts the day or night mode. After the lunch mode is finished, the dayor night mode starts again.• If the lunch mode is set using feature number “783#” in the automatic mode, the modecan only be canceled by using feature number “780#”. This can be useful duringholidays. The day and night modes are automatically changed at the programmed time in[007] even if feature number “780#” is not entered. These operations can only be doneby an operator or manager.• The operator and manager can see the status of the mode (day, night or lunch) by the pre-assigned DSS buttons’ LED on the DSS console. Time service can be changed easily bypressing the pre-assigned DSS buttons.• The following programming items will be affected by the time service.[405]-[407] Flexible Outward Dialing Assignment[408]-[410] Flexible Ringing Assignment[411]-[413] Delayed Ringing Assignment[414]-[416] Outside (CO) Line Mode[601]-[603] TRS – Class of Service Assignment[700]-[702] Doorphone Ringing Assignment[703]-[705] Door Opener Assignment• Required System Programming[006] Time (Day/Night/Lunch) Service Changing Mode[007] Time (Day/Night/Lunch) Service Start Time• Operating Instructions References1.8 Operator / Manager Service Features, “Time (Day/Night/Lunch) Service Setting”1.9 DSS Console Features, “Initial Settings”, Day, Night and Lunch ButtonsAssignmentFeatures 3-593 Features T+Time (Day/Night/Lunch) Service!!LUNCH
