Panasonic DMR-E65EE Service Manual

Contents

Panasonic DMR-E65EE Service Manual Manual pdf 17 page image

Item FL display Key operationMode name Description (Remote controller key)White Picture Output White picture is output as component Outputfrom AV Decoder.*White picture(Saturation rate : 100%)*It is enable to switch Interlace/Progressive by“I/Pswitch: [1] [4]”*Initial mode is “Interlace”. Press [1] [1] in service mode.Switch Interlace/Progressive Press [1] [4] in White Picture Outputmode.*I/P are switched alternately.Magenta Picture Output Magenta picture is output with ComponentOutput from AV Decoder.*Magenta picture(Saturation rate: 100%)*It is enable to switch Interlace/Progressive by“I/Pswitch: [1] [4]”*Initial mode is “Interlace”. Press [1] [2] in service mode.Switch Interlace/Progressive Press [1] [4] in Magenta PictureOutput mode.*I/P are switched alternately.RTSC Return in XP(A & V)AV1 input signal is encoded (XP), decoded(XP) and output decoded signal to externalwithout DISC recording and DISC playback.Initial mode: EE2/ Interlace/ XP/Audio 48kHzPress [1] [3] in service mode.Switch Interlace/Progressive Press [1] [4] in RTSC Return XPmode.*I/P are switched alternately.Audio 44.1 kHz/ 48 kHz Switch Press [2] [4] in RTSC Return XPmode.*48 kHz / 44.1 kHz are switchedalternately.I/P Switch Switch Interlace and Progressive in EE mode.*Initial setting is “Interlace”.*This command is effective during executing“White Picture Output”, “MagentaPictureOutput” and “RTSC Return in XP (A & V)”modes.Initial mode is InterlaceSwitch Interlace/ProgressivePress [1] [4] in I/P Switch mode.*I/P are switched alternately.Audio Mute (XTMUTE) Check whether mute is applied normally bythe timer microprocessor.Press [2] [1] in service mode.Audio Mute (XDMUTE) Check whether mute is applied normally bythe Digital P.C.B. (GLUE IC).Press [2] [2] in service mode.Audio Pattern Output The audio pattern stored in the internalmemory is output(Lch: 1kHz/-18dB)(Rch: 400Hz/-18dB)*Audio sound clock switching operation ofDAC can beconfirmed by sub command [2][4].Initial mode (Audio 48kHz) Press [2] [3] in service mode.Audio 44.1kHz/48kHz switching Press [2] [4] in Audio Pattern Outputmode.*48 kHz / 44.1 kHz are switchedalternately.Laser Used TimeIndictionCheck laser used time (hours) of drive.l(*****) is the used time display inhour.lLaser used time ofDVD/ CD inPlayback/Recording mode iscounted.Press [4] [1] in service mode.Delete the Laser UsedTimeLaser used time stored in the memory of theunit is deleted.Press [9] [5] in service mode.17DMR-E65EE / DMR-E65GC / DMR-E65GCS / DMR-E65GN