Panasonic CF-W8 Operating Instructions Manual

Also see for CF-W8 Series: Reference manual Reference manual Supplementary guide Reference manual Operating instructions

Panasonic CF-W8 Operating Instructions Manual Manual pdf 23 page image

23 Getting StartedUseful InformationTroubleshootingAppendixCAUTIONz You can use the following characters to set Intel(R) ME Password.• Minimum of 8 and maximum of 32 characters are used.• 1 or more numeric characters are included.• 1 or more special characters (example: “!” “$”) are included (only characters that can be displayed with the USkeyboard).• Capital letters and small letters are mixed.10 Installing the driverA Click [start] - [Run] and input “c:\util\drivers\amt\MEI\setup.exe”, then click [OK].Follow the on-screen instructions.B Click [start] - [Run] and input “c:\util\drivers\amt\LMS_SOL\setup.exe”, then click [OK].Follow the on-screen instructions.1 Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.The Setup Utility starts up.z If the password is requested, enter the Supervisor Password.2 If the Supervisor Password is not set, select the [Security] menu, then set SupervisorPassword.3 Select the [Security] menu, and select [AMT Configuration], and press Enter.4 Select [Intel(R) AMT] and press Enter.5 Select [Disabled] and press Enter.6 Press Esc.7 Select the [Exit] menu, and select [Save Current Values], and press Enter.At the confirmation message, select [Yes] and press Enter.8 Select the [Security] menu, and select [AMT Configuration], and press Enter.9 Select [Reset AMT Configuration] and press Enter.At the confirmation message, select [Yes] and press Enter.The computer will restart.z If the password is requested, enter the Supervisor Password.10 Press Y when the “Intel(R) ME unconfiguration in progress” message will appear.The computer will restart.11 Turn off the computer.Release AMT configuration