22Getting StartedUseful InformationTroubleshootingAppendixIntel® Active Management Technology (Intel® AMT) ® AMT>Intel ® AMT offers the operational management function and security function through network.1 Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.The Setup Utility starts up.z If the password is requested, enter the Supervisor Password.2 If the Supervisor Password is not set, select the [Security] menu, then set SupervisorPassword.3 Select the [Security] menu, and select [AMT Configuration], and press Enter.4 Select [Intel(R) AMT] and press Enter.5 Select [Enabled] and press Enter.6 Select [Intel(R) ME Setup Prompt] and press Enter.7 Select [Enabled] and press Enter.8 Press Esc.If you do not use the Supervisor Password, clear the Supervisor Password following steps.A Select [Set Supervisor Password], and press Enter.B Enter the Current Password, and press Enter.C Press Enter when the [Create New Password] display is shown.D Press Enter when the [Confirm New Password] display is shown.9 Press F10.At the confirmation message, select [Yes] and press Enter.The computer will restart.The following procedures are example. It is different according to your environment. Contact your technical sup-port office.A Press Ctrl + P when [Press to enter Intel(R) ME Setup] is shown after the [Panasonic] bootscreen disappears.B Enter “admin” in [Intel(R) ME Password], and press Enter.C Enter the New Password in [Intel(R) ME New Password] to change the password, and press Enter.At confirmation message, enter the password, and press Enter.Write down new password to remember you password.The password has the limitation (Î page 23).D Select [Intel(R) ME Configuration], and press Enter.At the confirmation message, press Y.E Select [Intel (R) Features Control] and press Enter.F Select [Manageability Feature Selection] and press Enter.G Select [Intel (R) AMT] and press Enter.H Select [Return to Previous Menu] and press Enter.I Select [Return to Previous Menu] again and press Enter.J Select [Intel(R) AMT Configuration] and press Enter.K Select [SOL/IDE-R] and press Enter then, press Enter on the [Caution] screen.Set all the items to [Enable] on the screen. Change other settings as necessary.L Select [Return to Previous Menu] after setup is complete.Follow the on-screen instructions.The computer will restart.Setting AMT configuration
