Panasonic CF-T1 Reference Manual

Also see for CF-T1 Series: Operating instructions User guide Operating instructions Service manual

Panasonic CF-T1 Reference Manual Manual pdf 12 page image

12Touchscreen When needed, the touchscreen can be configured using the following steps.1 Windows 2000Select on the taskbar and then select [TouchScreen] or select[TouchScreen] in [Control Panel] - [Mouse].Windows XPSelect on the taskbar and then select [TouchScreen] or select[TouchScreen] in [Control Panel] - [Printers and Other Hardware]- [Mouse].2 Make necessary changes.3 Select [OK].NOTE For more information about each itemSelect at the upper right corner in [Mouse Properties], then, using , selectthe item about which you want more information. The double-click speed of the touchscreen can be changed in [Buttons].Configurating the TouchscreenBDACA. Double click settingsSet the width and height of the double click.C. Advanced configurationSet the advanced settings.B. TestTest for the “Double click settings”.D. Calibration & TestDefine the calibration setup. Use this procedure when the cursor does notappear properly. (Necessary for changes in the alignment of the touch-screen with visual images or an adjustment of the display resolution.)Touch the “+” mark on the calibration screen for about one second.After the calibration procedure is executed (e.g., after the nine “+” marksare touched), the procedure ends when EnterEnterEnterEnter is pressed.