Panasonic CF-45 Series Reference Manual

Also see for CF-45 Series: Reference manual Operating instructions Service manual

Panasonic CF-45 Series Reference Manual Manual pdf 23 page image

23Using USB DevicesUSB ConnectorNOTENOTE11 Connect the USB device to your computerFor more detailed information, please refer to the operation manual that accompa-nies the USB device.Turn on the USB deviceYou may need to install drivers for your USB devices, simply follow the on-screeninstructions and refer to the operation manual that accompanies the USB device.12Removing USB DevicesPower off the USB device123Remove the USB deviceRemove the Windows 95 USB device drivers1 In [Start] - [Settings] - [Control Panel] - [Add/Remove Programs] - [Install/Uninstall],press [USB Supplement to OSR2] , then press [Add/Remove].2 The display will ask you to restart Windows, then select [Yes].Execute the following steps if the operation of a USB device is unstable. When thesteps below are implemented, however, faults such as Windows being unable to shutdown exist when the USB HUB remains connected. (In such cases, remove the USBHUB.)1 In [Start] - [Run], input [c:\util\msupdate\usbupd2.exe]**, then press [OK].** After reinstalling the hard disk, set the Windows 95 CD-ROM included in the Win-dows 95 System Pack and input [L:\other\updates\usb\usbupd2.exe].2 In [Start] - [Shut Down], select [Restart], then press [OK].3 In [Start] - [Run], input [c:\util\msupdate\usbcopy.bat], then press [OK].4 Click at the upper right corner to close the display.5 In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select[xxxx PCI to USB Universal Host Controller] in [Universal serial bus control-ler], press [Remove], then press [OK].6 Press [Refresh] and press [Close] at the [System Properties],7 Restart the computer,NOTE