Panasonic CF-45 Series Reference Manual

Also see for CF-45 Series: Reference manual Operating instructions Service manual

Panasonic CF-45 Series Reference Manual Manual pdf 22 page image

22Using USB DevicesCAUTIONRun the Setup Utility ( page 26)123Using and , select [Power]45Using and , select [Power Management] and pressEnter9Using and , select [Power Switch] and press EnterUsing and , select [Fn+F7/Fn+F10 key] and press EnterInstall the Windows 95 USB device drivers1 In [Start] - [Run], input [c:\util\msupdate\usbsupp.exe]*, then press [OK].At the confirmation message, press [Yes].* After reinstalling the hard disk, set the Windows 95 CD-ROM included in the Windows 95System Pack and input [L:\other\updates\usb\usbsupp.exe].2 Read the [END-USER LICENSING AGREEMENT] and press [Yes] or [No].• Installation will start if [Yes] is pressed.• Installation will be aborted if [No] is pressed.3 At the display indicating the completion of installation, press [OK]. The computerwill automatically restart.4 In [Start] - [Run], input [c:\util\msupdate\usbcopy.bat], then press [OK].5 Click at the upper right corner to close the display.6 In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select [PCIUniversal Serial Bus] in [Other devices], press [Remove], then press [OK].7 Press [Refresh] and press [Close] at the [System Properties],8 Restart the computer,After a driver has been installed, do not use the suspend or hibernation function. Ifthe suspend or hibernation mode is activated, the computer may not function prop-erly. Power off, then on, using the power switch to resume proper operation.If you want to use the suspend or hibernation function when the USB driver isinstalled, disable the USB device function of the computer. ( page 6)(To next page)Using and , select [Disable] and press EnterUsing and , select [Off] and press EnterUsing and , select [Disable] and press EnterPress F10 , then select [Yes]10678Installing USB Devices