Panasonic CF-07 Series Reference Manual

Also see for CF-07 Series: Operating instructions Operating instructions Service manual Reference manual Tips for use

Contents

Panasonic CF-07 Series Reference Manual Manual pdf 37 page image

37device address ConflictAddress conflict for specified device.Allocation Error for: deviceRun ISA or EISA Configuration Utility to resolve resource conflict for the specified device.Failing Bits : nnnnThe hex number nnnn is a map of the bits at the RAM address which failed the memory test. Each 1 (one) in the map indicates afailed bit. See error 230,231 or 232 for offset address of the failure in System, Extended or Shadow memory.Invalid System Configuration DataProblem with NVRAM (CMOS) data.I/O device IRQ conflictI/O device IRQ conflict error.Operating System not foundOperating system cannot be located on either drive A: or drive C:. Enter Setup and see if fixed disk and drive A: are properlyidentified.Parity Check 1 nnnnParity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate theaddress, it displays ????. Parity is a method for checking errors in binary data. A parity error indicates that some data has beencorrupted.Parity Check 2 nnnnParity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address,it displays ????.Press to resume, to SetupDisplayed after any recoverable error message. Press to start the boot process or to enter a Setup and change thesettings. Write down and follow the information shown on the screen.List of Error Codes