Input Signal Format Standard Manualsetting setting(MANUAL)NTSC, PAL, 480/60i, ITU601480/60p, 576/50i, 575/50p ITU709720/60p, 1080/50i, 1080/60i, ITU7091035/60i, 1080/24psF MATRIX>SELECT :MANUALR-Y PHASE :90R/B GAIN :0.86G-Y PHASE :244G/B GAIN :0.30sub menuresetEXIT: MENU ADJUST:- + SELECT:5. AREA MARKER-RItems : Selects the size marker for the other screen ratio(aspect) used when the screen ratio is 16:9. (forexternal control)Settings : OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2Functions : OFF: The marker is not displayed.16:9/4:3/13:9/14:9: Displays the marker (a whitequadrangle) showing the screen size of eachaspect ratio.MODE 1/MODE 2: Displays no markers becausethese settings will be used for function expansionin the future.●AREA MARKER-R is displayed when a 16:9 picture suchas 1080i/1035i/720p etc. is displayed or the picture isswitched to the 16:9 screen ratio by pressing the ASPECTbutton.●The marker is actually displayed when the external controlselects each setting. (No markers are displayed even ifeach marker is selected only in the monitor’s AREAMARKER-R setting.)6. CENTER MARKERItems : Makes the centre marker appear or disappear.Settings : ON/OFFFunctions : ON : The centre marker (a white cross) isdisplayed on the centre of the screen.OFF : The marker disappears.●To actually display the marker, the AREA MARKERbutton on the monitor needs to be pressed so that it isilluminated.Centre marker7. COLOR MATRIXSelects or adjusts thestandard of the colourdemodulation (colourrendering). Press thebutton to display the settingmenu illustrated on the right.The menu screen whenMANUAL is selected.● The standard setting is set to “ITU601” or “ITU709”depending on the input signal format.The factory preset of MANUAL is ITU709Item : SELECTFunction : Selects the picture matrix standard.Settings : ITU601 or ITU709/ MANUALITU601 or ITU709 : Standard settingMANUAL : Manual settingNOTE :The following items are displayed when MANUAL isselected. When ITU601 or ITU709 is selected, theyare not displayed.Item : R-Y PHASEFunction : Sets the R-Y phase.Settings : 90/92/94/112Item : R/B GAINFunction : Sets the R/B gain.Settings : 0.86/0.56/0.68/0.79Item : G-Y PHASEFunction : Sets the G-Y phase.Settings : 244/253/236/240Item : G/B GAINFunction : Sets the G/B gain.Settings : 0.30/0.34/0.40/0.45Item : sub menuFunction : Performs the R-Y PHASE, R/B GAIN, G-YPHASE or G/B GAIN settings in a single-linedisplay. The display position depends on the“sub menu POSITION” setting.Settings : Same as R-Y PHASE, R/B GAIN, G-Y PHASE orG/B GAINItem : resetFunction : Sets the R-Y PHASE, R/B GAIN, G-Y PHASEand G/B GAIN values to factory-preset ones.R-Y PHASE 90ITU601 R/B GAIN 0.79G-Y PHASE 244G/B GAIN 0.45R-Y PHASE 90ITU709 R/B GAIN 0.86G-Y PHASE 244G/B GAIN 0.3012
