Panasonic AW-RP505 Operating Instructions Manual

Also see for AWRP505 - MULTI HYBRID CTL PAN: Service manual Operating instructions

Contents

Panasonic AW-RP505 Operating Instructions Manual Manual pdf 35 page image

-33-5. Camera and Pan/tilt Head Presetting1) Select a desired operating camera and pan/tilt headwith the CONTROL switch @2.2) Pick up a desired object with the camera usingPAN/TILT Lever #8 ZOOM Lever #6 and FOCUS Lever#7 Select a white balance control mode usingAUTO/ATW ATW Switch o AUTO/ATW A Switch !0 orAUTO/ATW B Switch !1. To store iris data in the mem-ory, set IRIS AUTO/MANU Switch @5 to the MANU posi-tion and turn the iris control. When IRIS AUTO/MANUSwitch @5 is in the AUTO position, iris data will not bestored in the memory.3) Keep MEMORY Switch @7 depressed (MEMORY Switch@7 lights and all the 10 buttons of PRESET Switch @8flash), press any of the buttons [1] to [10] of PRESETSwitch @8 as desired to store the data in the memory.Only that button of PRESET Switch @8 where the data isstored lights.Note: If data is stored again in the same button of PRE-SET Switch @8 the preceding data is deleted.4) Repeat Steps 1) and 2) to store the presettings of allthcameras an pan/tilt head in the memory.6. Various Switch SettingsSelect a desired operating camera and pan/tilt head withthe CONTROL switch @2, then control the camera andpan/tilt head using PRESET Switch @8, PAN/TILT Lever #8,ZOOM Lever #6, FOCUS Lever #7, IRIS AUTO/MANUSwitch @5 and other switches.* In case of not changing the adjustment data and set-tings, it is not necessary to repeat the adjustment andsetting procedures described in Sections 2 to 6.