Panasonic AW-RP505 Operating Instructions Manual

Also see for AWRP505 - MULTI HYBRID CTL PAN: Service manual Operating instructions

Contents

Panasonic AW-RP505 Operating Instructions Manual Manual pdf 16 page image

-14-$3 Preview Video Input Connector [TO MULTIPORTHUB, PREVIEW IN] (BNC Connector)Connect it to the preview video output connector[PREVIEW OUT] on the Multiport Hub with a coaxialcable (5C-2V or equivalent). The maximum allowablelength of the cable is 10 meters.$4 Genlock Output Connector [TO MULTIPORT HUB,G/L OUT] (BNC Connector)Connect it to the G/L input connector [G/L IN] on theMultiport Hub with a coaxial cable (5C-2V or equiva-lent) in operating the camera in external sync mode.The cable can be extended up to 10 meters.1 +5V2 ZOOM3 FOCUS4 TILT5 PAN6 GND7 SPEED8 IRISGround GND123467Ground58Example of auxillarycontrol circuitNote: Make sure that the lens and pan/tilt head stopat the center point of the zoom, focus, pan and tilt controls(or at the lever reset position if the controls have a lever reset function).Iris controlZoomcontrol PancontrolTiltcontrolFocuscontrolSPEED switch100Ω 10KΩ10KΩ10KΩ10KΩ6.8KΩ20KΩ6.8KΩ100Ω100Ω100Ω8-pin DIN connectorpin assignment(as viewed from therear of the control panel)$5 Camera Control Output Connector[TO MULTIPORT HUB, CAMERA CONTROL OUT](BNC Connector)Connect it to camera control input connector [CAM-ERA CONTROL IN] on the Multiport Hub with a coaxialcable (5C-2V or equivalent), which may be extendedup to 10 meters.$6 Pan/tilt Control Output Connector[TO MULTIPORT HUB, PAN/TILT CONTROL OUT](RJ-45 8-pin Modular Jack)Connect it to pan/tilt control output connector [P/TCONTROL IN] on the Multiport Hub with a 10BASE-Tstraight cable (UTP category 5 or equivalent), whichmay be extended up to 10 meters.