Panasonic AV6 Series Manual

Panasonic AV6 Series Manual Manual pdf 2 page image

AV6 (CS) Subminiature SwitchesPanasonic Corporation Electromechanical Control Business Divisionindustrial.panasonic.com/ac/e/2©Panasonic Corporation 2019AECTB60E 201903SPECIFICATIONS■ Contact rating■ Characteristics■ Operating characteristicsPRODUCT TYPES■ Lever position: StandardActuator Operating Force (OF) Max. Contact formSPST-NC SPST-NOPin plunger 0.50N AV620264 AV6302641.50N AV620564 AV630564Hinge lever 0.20N AV622264 AV6322640.50N AV622564 AV632564Simulated roller lever 0.20N AV624264 AV6342640.50N AV624564 AV634564Roller lever 0.20N AV625264 AV6352640.50N AV625564 AV635564■ Lever position: BackwardActuator Operating Force (OF) Max. Contact formSPST-NC SPST-NOHinge lever 0.35N AV62221264 AV632212641.00N AV62251264 AV63251264Simulated roller lever 0.35N AV62421264 AV634212641.00N AV62451264 AV63451264Roller lever 0.35N AV62521264 AV635212641.00N AV62551264 AV63551264Contact Contact voltage Resistive load (cos φ ≈ 1)Au-clad double layer contact 30V DC 0.1A5V DC 1mA Low-level circuit ratingItem SpecificationsExpected life Mechanical (OT) Max. Min. 5 × 105 (at 60 cpm)Electrical (Rated load OT Max.) Min. 2 × 105 (at 20 cpm)Insulation resistance Min. 100MΩDielectric strengthBetween non-continuous terminals 1,000 Vrms for 1 min.Between each terminal and otherexposed metal parts 1,500 Vrms for 1 min.Between each terminal and ground 1,500 Vrms for 1 min.Contact resistance (initial) 100mΩ max. (by voltage drop 0.1A 6 to 8 VDC)Value includes the resistance between the connector and the lead (#AWG28, length: 50 mm)Viblation resistance (malfunction vibration resistance) 10 to 55 Hz at single amplitude of 0.75mm (Contact opening: max. 1msec.)Shock resistance (malfunction shock resistance) Applied shock 1.50N type: Min.300m/s2 (Contact opening: Max. 1msec.)0.50N type: Min.150m/s2 (Contact opening: Max. 1msec.)Connector insertion force Max. 20N (inserted in removal direction)Connector holding force Min. 20N (extracted by static load, in removal direction)Connector removal operating times Max. 5 times (in removal direction)Allowable operating speed (No load) 0.1 to 1,000 mm/s (at pin plunger)Max. operating cycle rate (No load) 300 cpmAmbient temperature –25 to +85°C (No freezing and condensing)Unit weight Approx. 2.5g (pin plunger type)Contact specifications Contact material CuNi alloy + Au-cladProtection grade IP401) Lever position: StandardActuator Operating Force (OF)Max.Release Force (RF)Min.Pretravel (PT)Max.Movement Differential(MD) Max.Overtravel (OT)Min.Operating Position(OP)Pin plunger 0.50N 0.04N 0.6mm 0.1mm 0.4mm 8.4±0.3mm1.50N 0.25NHinge lever 0.20N 0.02N 2.6mm 0.8mm 1.2mm 10.0±0.8mm0.50N 0.06NSimulated roller lever 0.20N 0.02N 2.6mm 0.8mm 1.2mm 12.2±0.8mm0.50N 0.06NRoller lever 0.20N 0.02N 2.6mm 0.8mm 1.2mm 15.7±0.8mm0.50N 0.06NDownloaded from Arrow.com.Downloaded from Arrow.com.