Panasonic AV4 Manual

Panasonic AV4 Manual Manual pdf 2 page image

AV4 (FU) Miniature SwitchesPanasonic Corporation Electromechanical Control Business Divisionindustrial.panasonic.com/ac/e/2©Panasonic Corporation 2019AECTB16E 201903CONTACT FORMSPECIFICATIONS■ Contact rating■ Characteristics■ Operating characteristicsDATAApplicable current and voltage range forAu contact type (reference)100200501010.20.1 5 12 24 30DC voltage (V)Current (mA)Load typeType of contact Resistive load (cosφ ≒ 1)Ag plated contactPlunger color: Black 0.5A 30V DCAu plated contactPlunger color: Dark red 0.1A 30V DCItems SpecificationsExpectedlifeMechanical Min. 3 × 105 operations (at 60 cpm)Electrical Ag plated contact Min. 2 × 104 operations (0.5A 30V DC; at 20 cpm)Au plated contact Min. 2 × 105 operations (0.1A 30V DC; at 20 cpm)Insulation resistance Min. 100 MΩ (250V DC by insulation resistance meter)DielectricstrengthBetween non-continuous terminals 500V AC for 1 min.Between each terminal and other exposed metal parts 500V AC for 1 min.Between each terminal and ground 500V AC for 1 min.Contact resistance (initial) Max. 200 mΩVibration resistance Pin plunger type 10 to 55 Hz at single amplitude of 0.75mm (contact opening: max. 1 msec.)Lever type 10 to 55 Hz at single amplitude of 0.15mm (contact opening: max. 1 msec.)Shock resistance Pin plunger type Min. 294m/s2 (contact opening: max. 1 msec.)Lever type Min. 147m/s2 (contact opening: max. 1 msec.)Allowable operation speed 0.1mm/s to 500mm/s (pin plunger type)Mechanical max. switching frequency 60 operations/min.Ambient temperature –25 to +80°C (no freezing and condensing)Unit weight PC board terminal type: Approx. 0.2gSolder terminal with mounting holes type: Approx. 0.3gProtection grade IP40Note: Test conditions and judgement are in accordance with NECA C 4505.1) PC board terminalActuators Operating Force (OF)Max.Release Force (RF)Min.Pretravel (PT)Max.Movement Differential(MD) Max.Overtravel (OT)Min.Operating Position(OP)Pin plunger 0.98 N 0.098 N 0.3 mm 0.1 mm 0.1 mm 4.8±0.15 mmHinge lever 0.25 N 0.010 N 2.4 mm 0.7 mm 0.4 mm 5.8±0.7 mmSimulated roller lever 0.29 N 0.010 N 2.2 mm 0.7 mm 0.3 mm 6.1±0.7 mm2) Solder terminalActuators Operating Force (OF)Max.Release Force (RF)Min.Pretravel (PT)Max.Movement Differential(MD) Max.Overtravel (OT)Min.Operating Position(OP)Pin plunger 0.98 N 0.098 N 0.3 mm 0.1 mm 0.1 mm 5.4±0.15 mmHinge lever 0.25 N 0.020 N 2.4 mm 0.7 mm 0.4 mm 6.4±0.6 mmSimulated roller lever 0.29 N 0.020 N 2.2 mm 0.7 mm 0.3 mm 6.7±0.5 mmCOM NCNO