Panasonic AV-SF500 Operating Instructions Manual

Panasonic AV-SF500 Operating Instructions Manual Manual pdf 3 page image

Live Switcher Software Control Panel© Panasonic Corporation 2022 - 3 -1. About Software Control PanelIntroductionSoftware Control Panel is application software for AV-UHS500 that runs in Windows and Macintosh.This software is used to control AV-UHS500 to perform operations such as switching the video materialfor the PGM, PVW and other video buses while checking the material, turning keys on and off,controlling the playback of still images and clips, and viewing a list of all materials.The main features of this software are as follows.[Background transition and wipe operation]ME selectionSelect the ME to be operated.Bus and material selectionSelect the PVW, and PGM and KEY1, KEY2, and KEY3 buses and display and select the materialof each of the buses. Either a video or still image is displayed for material display depending on thematerial.Transition operationSelect from BKGD, and KEY1 as the transition target and then perform the transition operation. Transition type settingSet a transition type from MIX, and WIPE. Wipe direction selectionSelect the direction for the wipe when a background transition is executed.You can select from R (reverse), and N/R (normal reverse). Transition executionA transition is executed using any of the fader operation, AUTO (auto transition), and CUT(instant transition). Transition pattern selectionAs the transition pattern, select one of the 16 (4K) / 51 (2K) patterns displayed in the multiplepages that can be switched by the FWD/BACK buttons.[KEY/DSK operation]Execute/cancel transitions for KEY1.Display the setting information of the material set for each key. Material thumbnails Transition type and transition time