(120/139)Bit6: OSDBit7: MULTI DISPBit8: PROTECTBit9: EXT-CTRLBit10: ADVANCEDBit11: ADVANCED2Bit12: HTTPBit13: ReserveBit14: ReserveBit15: ReserveEx.) Setting the following value for T4Bit0: ALL INPUT is OFF (0).Bit1: PICTURE is OFF (0).Bit2: ADJUST is ON (1).Bit3: AUDIO is ON (1).Step 1: Put above bit in following order.Bit3-Bit2-Bit1-Bit0Value: 1100Step 2: Write the value of Step 1 by a hexadecimal number.Value: 0ChStep 3: Encode the value of Step 2 to ASCII characters.Value: '0' and 'C' (30h and 43h)ETX (03h): End of MessageCheck codeBCC: Block Check CodeRefer to the section 4.3 “Check code” for a BCC calculation.DelimiterCR (0Dh): End of packet
