NEC X554UN-TMX4P Manual

NEC X554UN-TMX4P Manual Manual pdf 2 page image

NEC Display Solutions of America, Inc.QIG-TMX4P-554UNSX554UN-TMX4P, X554UNS-TMX4P Rev 1.121. For mounting information, please refer to Installation Instructions provided by PeerlessIndustries, Inc. inside the box of the DS-VW765-L40.2. Connect the NEC display using the provided DisplayPort cables. Please note that in thepicture below, the IN connection is on the left and circled in red while the OUT connection ison the right and circled in blue.3. Connect the LAN cables that are located within the display box to daisy chain each display.Note that the 25ft cat5e patch cable provided is optional and can be used for connecting thesource to display 1 within the wall. Note that in the picture below, LAN1 is on the left andcircled in red while LAN2 is on the right and circled in blue. LAN1 should be utilized as theIN connection and LAN2 should be utilized as the OUT connection The LAN daisy chaincan be utilized to pass RS232C, IR Remote or TCP/IP information to each display down thedaisy chain.4. Apply the OverFrame bezel kit to the video wall. Please follow instructions provided with kit.KT-46UN-OF is utilized with the X554UN displays and KT-46UN-OF2 is utilized with theX554UNS displaysOverframe Kit