NEC VERSA SX HARD DISK DRIVE Upgrade Manual

Also see for VERSA SX HARD DISK DRIVE: Service and reference manual Important information Manual Manual Product guide

NEC VERSA SX HARD DISK DRIVE Upgrade Manual Manual pdf 2 page image

2 Upgrading the Hard Disk Drive on the NEC Versa SX1. Save your files, exit Windows, and turn off system power.2. Tilt the LCD panel back slightly to provide sufficient access to the keyboard retainers.3. Use the notch on the left end of the keyboard retainer to lift it as you apply slight pressure tothe right hand side of the keyboard retainer.4. Slide the keyboard retainer to the left and lift it to remove.Removing the keyboard retainer5. Gently lift up the edge of the keyboard nearest the LCD panel and slide the keyboardtoward the LCD screen to release the tabs that secure it.6. Carefully place the keyboard against the LCD panel. Be careful not to twist or disconnectthe keyboard cable.Lifting the keyboard7. Remove the disk drive as follows. Remove the screw that secures the hard disk drive. Locate the hard disk drive tab and firmly pull the tab to disconnect the drive.