Menu
NEC ShadowSense Touch MultiSync E705 SST User Manual
Also see for MultiSync X651UHD-2: User manual
          |
2 © NEC Corporation 2016For using Touch Panel1. Turn off the monitor.2. Install the equipment.*1- Using slot 2 type PC (OPS):Connect the slot 2 type PC into the option board slot. Connect the B type connectorto the USB upstream port on the left back side of the monitor and the A typeconnector to the downstream port on the slot 2 type PC.NOTE: Please refer to the slot 2 type PC’s manual for connection.NOTE: When you set option board accessory other than slot 2 typePC, touch function may not work.- Using external computer:Connect the B type connector to the USB upstream port on the left back side of themonitor and the A type connector to the downstream port on the external computer(Figure 1).NOTE: On all ShadowSense touch displays from 40” up to 80”, the USB connectortype B is located on the left back side of the monitor, above the OPS slot. (Figure 2)NOTE: On all ShadowSense touch displays from 84” up to 98”, the USB connector islocated on the bottom of the right back side of the monitor. (Figure 3)Figure 1: Figure 2: |
Related manuals for NEC MultiSync X651UHD-2
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved