Menu
NCT M&H IRT35.70 Operating Instructions Manual
                   |
M&H IRT35.70INFRARED TOOL SETTEROPERATING INSTRUCTIONSNCT Ipari Elektronikai Zrt. 3 / 19 26 May 2023H-1148 Budapest, Fogarasi út 7.Phone: +36 1 467 6300www.nct.hu1 DESCRIPTION1.1 General1.1.1 PrefaceThe safety instructions in this manual have to be strictly observed to guarantee a safe and reli-able function of the tool setter and to avoid personal and material damage. The meaning ofthe symbols related to the safety instructions is described in the table below.CAUTION CAUTION indicates a hazard which can lead to injuries if notavoided.NOTICE NOTICE indicates information considered important, but nothazard-related (e.g. messages relating to property damage).INFORMATION INFORMATION indicates important information or helpfuladvice for working with the described device.1.1.2 Safety InstructionsCAUTIONRisk of injuries due to moving machine parts or defect compressed air lines! Installation must only be carried out if the machine is switched to a completely de-energized and de-pressurized state to avoid the risk of injuries due to moving machineparts or defect compressed air lines. Operation of the tool setter is only allowed with closed guards (safety doors).NOTICERisk of material damage caused by third-party parts! Only the original spare parts listed in this manual are permitted for preventive and correc-tional maintenance.INFORMATIONThe information given in this manual can be changed by the manufacturer at any time.Thus the user is responsible to regularly inquire about updated information.1.1.3 Declaration of ConformityThe EC Declaration of Conformity can be found at the end of these operating instructions.If required, a copy of the signed original declaration of conformity may be requested fromthe address given on the back cover. |
Related manuals for NCT M&H IRT35.70
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved