NAIM PREAMPS Manual

Also see for nac 102: Manual Owner's manual

Contents

NAIM PREAMPS Manual Manual pdf 19 page image

18narcom 2 remote handsetNARCOM 2 is a multi-functional remote control handset designed to be used with Naim Audio CDplayers, integrated amplifiers, pre-amplifiers and preset tuners. The handset control configuration isbased around three types of keys: System Component Keys, Global Keys and Soft Keys.1 System Component KeysThese keys switch the operation of the “Soft Keys” into modes appropriate to each system component(preamp, CD or tuner).preamp: Switches the action of the Soft Keys to that appropriate for an integrated or pre-amplifier.cd: Switches the action of the Soft Keys to that appropriate for a CD player.tuner: Switches the action of the Soft Keys to that appropriate for a preset tuner.2 Global KeysThese keys operate specific component functions regardless of the System Component Key setting.preampvol (up and down): Adjusts the amplifier output volume and the volume controlposition.mute: Reduces the amplifier output volume to zero. A second press restoresthe volume. The mute button on the amplifier will illuminate when muteis selected.bal (left and right): Adjusts the output channel balance.Some Naim amplifiers have control of balance available only from theremote handset. On these products the balance will automatically “centre”as it reaches the mid point. Balance centring is indicated by a flashingvolume control indicator. To resume adjustment once the balance hascentred, bal key must be released and re-pressed.mon: The mon button enables the output of a 3-head tape machine to be heardwhile recording in order to check the “off-tape” signal. The source to berecorded is chosen by the input selector buttons in the normal way.After pressing mon, select the input to which your machine is connected.A second operation of the mon key restores normal output.compact discprev: Selects the previous track. From a stopped position prev will select the lasttrack.next: Selects the next track.stop: Stops the CD. Holding the stop key for more than a second will also cancelpreviously set-up program and display preferences.play: Plays the CD. Pressing play while a track is playing will return the playerto the beginning of that track.<<: Fast reverses the CD when in play mode.>>: Fast forwards the CD when in play mode.repeat: Puts the CD into repeat mode. A complete disc or programmed discselection will repeat until stop is pressed.pause: Pauses a playing CD. Pressing pause a second time will start the disc again.tunermode: Switches the tuner sequentially through “frequency”, “scan” and “preset”modes. Modes are indicated on the tuner display.up & down: These keys both have three possible functions depending upon the selection of themode key. In frequency mode the up and down keys adjust the tuning frequencyin 50kHz steps. In scan mode the up and down keys will cause the tuner tosearch for stations. In preset mode the up and down keys will tune to the nextnumbered preset.mono: Toggles between mono and stereo operation. The tuner display will indicate stereowhen both stereo operation is selected and a stereo signal is received. The monobutton on the tuner will illuminate when mono is selected.SystemComponentKeysGlobal Keys(Amplifier)Global Keys(CD Player)Global Keys(Tuner)Soft Keysn218

/ 21

Related manuals for NAIM nac 102