KitchenAid W10193740A User Instructions

Also see for KUDK03CTWH - 24 Inch Full Console Dishwasher: Installation instructions Parts list

Contents

KitchenAid W10193740A User Instructions Manual pdf 7 page image

7FLEXI-FOLD DOWN™ Flexible TinesThe row of tines on the left-hand andright-hand sides of the mid-level rackcan be adjusted to make room for avariety of dishes.To adjust the fold-down tines:1. Grasp the tip of the tine that is inthe tine holder.2. Gently push the tine out of theholder.3. Lay the tines down, toward thecenter of the rack.SURE-HOLD ® Light Item ClipsThe light item clips hold lightweight plastic itemssuch as cups, lids, or bowls in place duringwashing.To move a clip:1. Pull the clip up and off the tine.2. Reposition the clip on another tine.Removable Mid Level Rack InsertsYour dishwasher has two removable mid level rack inserts whichallow you to adjust the rack to the type of load you are washing.To install rack inserts:Place the insert end legs under the front or back rack wire asshown below. Push down on the center insert wire until it slidesinto the holding clip on either side of the center in the bottom of therack.To remove inserts:Lift up on the insert wire located toward the center of the rack torelease the insert from the holding clips. Lift insert out of rack.Removable Mid Level and Culinary Tool RacksThe removable racks allow you towash larger items such as stockpots, roasters, and cookie sheetsin the lower level rack.IMPORTANT: Remove dishesprior to removing the mid levelrack from dishwasher.To remove the rack:1. To access track stops, pull therack forward until it stops andclicks into place.2. To open track stops, flip the track stop to the outside of thetrack.3. After opening both track stops, slide front wheels up and outof the slot in track. Continue to pull rack forward in track andslide the back wheels up and out of the track.4. Close track stops.5. Slide rack tracks back into dishwasher.To replace the rack:1. Gently pull rack tracks forward in dishwasher until they stopand click into place.2. To open track stops, flip the track stop to the outside of thetrack.3. Place the back rack rollers on each side of the rack into thetrack slot and roll the rack back into the tracks.4. Insert front rack rollers on each side of the rack into the rackslots.5. Close track stops on both sides of rack and slide rack backinto dishwasher.Culinary Tool RackThe culinary tool rack is designed with 2 movable baskets to holdextra silverware, knives and cooking utensils.Install the baskets in this up position when you have extrasilverware and flatware to wash.Install the baskets in this down position when you have extrasilverware, knives, or utensils requiring more room to wash.IMPORTANT: When you are using the culinary tool baskets in thedown position, the mid level rack must also be in the lowestposition.A. Removable rack insertsB. Insert holding clipsA. Lift removable insert wire to remove from holding clipsB. Holding clipsABABUp positionDown positionA. Track stopB. TrackAB