KitchenAid KDFE454CSS Installation Instructions Manual

Also see for Architect II KUDS30IVSS: Installation instructions Energy guide User instructions User instructions

Contents

KitchenAid KDFE454CSS Installation Instructions Manual Manual pdf 13 page image

13Remove the ground connector screw and place through the ringterminal of the green ground wire. Reattach and tighten theground connector screw.NOTE: Do not pre-twist stranded wire. Twist on wire connector.Gently tug on wires to be sure both are secured.Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors (included with powersupply cord kit).If needed, see website for animated representation of this step.Visit www.kitchenaid.com/electrical under FAQ tab.Tighten strain relief screws to secure cord.Place wires inside terminal box. Insert tabs on left side of cover.Make sure wires are tucked inside box. Close cover ensuringwires are not pinched. Use ¹⁄₄" hex-head socket, nut driver orTorx® T20® screwdriver and previously removed screw to securecover.NOTE: Do not plug into outlet until instructed to do so.WARNINGElectrical Shock HazardElectrically ground dishwasher.Connect ground wire to green ground connector interminal box.Do not use an extension cord.Failure to follow these instructions can result in death,fire, or electrical shock.