Menu
Kirk 25309010001 Installation And Instruction Manual
        |
Installation guide and instruction manualfor Kirk Coffee Machine model KM6-2 and KM12-2Congratulations with your new coffee machine.Before you start using the machine it is important that you read this guidethoroughly to make sure that the machine is installed correct and can beused safely.Installation guide• To gain full advantage of your coffee machine we recommend that themachine is installed by trained personnel.• The coffee machine is designed to be mounted against a wall or similarsolid object. It is secured by screws through the 4 holes of the rear plateof the machine.• The coffee machine is not to be placed unsecured on a shelf or otherhorizontal base.• The coffee machine must not be mounted in locations where it can causeinjuries to driver or passengers in case of accidents or emergencysituations.• The coffee machine installation must not affect the function of the airbagof the vehicle.• The cigar lighter plug of most vehicles does not allow electrical currentexceeding 8 Ampere. It is important to follow the installation instructionsbelow:o The red or grey wire from the coffee machine must beconnected to the starter motor, starter relay or the positive poleof the battery.o The black or blue/grey wire has to be connected to the engineblock, vehicle chassis or the negative pole of the battery.o Measure the total wire length of the connections between thecoffee machine and supply points. Both the positive andnegative wires must be included in the total length.o It is important that the wire size is used to suit the current andlength of the connections.Use the table below:Wire length: 24V, 500W, 21A 12V, 350W, 29A0-6 m 6 mm² 10 mm²6-10 m 10 mm² 16 mm²10-13 m 16 mm² 16 mm² |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved