Menu
Keystone KSTFA12AAG Instruction Manual
     |
User Servicing InstructionsGrasp plug and remove from the receptacle or other outlet device. Do not unplugby pulling on cord. Open fuse cover (A.) by sliding access cover on top ofattachment plug towards blades. Remove fuse carefully (B.) by gently prying outthe ends of the fuse from the receptacle.Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.Install replacement fuse (C.) by first placing the end of the fuse into the fusereceptacle which is opposite of the blades of the plug, then carefully push in theother end. Only push against the metal end of the fuse, not the glass centerportion. Close the fuse access cover (D.) by sliding the cover back into the pluguntil it is completely closed, latches and is flush with the face of the plug.Risk of fire. Do not replace attachment plug.Contains a safety device (fuse, AFCI, LCDI) that should not be removed.Discard product if the attachment plug is damaged.Know Your FanParts and FeaturesHeight Adjust Button Use only when higher position required. Pressing the height adjust button, pull the slidepipe upwards. When lower position required, just push the slidepipe downwards.You can adjust the height in 2 steps.Caution: Be careful not to pinch fingers. Before moving this electric fan, make sureHeight Adjust Button is properly fixed.P3-14606 P4-14606 |
Related manuals for Keystone KSTFA12AAG
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved