Keysight E5071C Configuration Manual

Keysight E5071C Configuration Manual Manual pdf 2 page image

02 | Keysight | E5071C Network Analyzer - Configuration Guide1. Order the 82357B USB/GPIB interface at the same time if you want tocontrol power meters with the E5071C. This will allow you to conductscalar mixer calibrations (SMC), power calibrations, or receiver calibra-tions after power calibrations.2. E5071C-TDR is a superset of E5071C-010. To add option TDR, you do notneed to have option 010 already installed; however, you can have bothoption 010 and TDR installed in one instrument3. Consider purchasing Keysight 20mm TORQUE WRENCH 8710-1764 forNMD 3.5 mm(f) test port connector.This configuration guide describes standard configurations, op-tions, accessories and peripherals for the E5071C ENA networkanalyzer. Refer to the ENA brochure for a complete description ofthe ENA network analyzer and the E5092A configurable multiporttest set.E5071C ENA Network AnalyzerThe ENA is an integrated network analyzer with a two- or four-port S-parameter test set, a synthesized RF source, a 10.4-inchcolor LCD, and a hard disk drive. A 3-year return-to-KeysightTechnologies, Inc. service warranty is included with the each ENAnetwork analyzer.Step 1: Select frequency range, number of testports, and with or without bias teesUp to 4.5 GHz range9 kHz to 4.5 GHz (without bias tees)E5071C-240 2-port S-parameter test setE5071C-440 4-port S-parameter test set100 kHz to 4.5 GHz (with bias tees)E5071C-245 2-port S-parameter test setE5071C-445 4-port S-parameter test setUp to 6.5 GHz range9 kHz to 6.5 GHz (without bias tees)E5071C-260 2-port S-parameter test setE5071C-460 4-port S-parameter test set100 kHz to 6.5 GHz (with bias tees)E5071C-265 2-port S-parameter test setE5071C-465 4-port S-parameter test setUp to 8.5 GHz range9 kHz to 8.5 GHz (without bias tees)E5071C-280 2-port S-parameter test setE5071C-480 4-port S-parameter test set100 kHz to 8.5 GHz (with bias tees)E5071C-285 2-port S-parameter test setE5071C-485 4-port S-parameter test setUp to 14 GHz range3300 kHz to 14 GHz (with bias tees)E5071C-2D5 2-port S-parameter test setE5071C-4D5 4-port S-parameter test setUp to 20 GHz range3300 kHz to 20 GHz (with bias tees)E5071C-2K5 2-port S-parameter test setE5071C-4K5 4-port S-parameter test setStep 2: Select time baseE5071C-1E5 High stability time baseE5071C-UNQ Standard stability time baseStep 3: Select hard disk driveE5071C-017 Removable hard disk driveE5071C-019 Standard hard disk driveStep 4: Choose additional options (Optional)E5071C-0081 Frequency offset modeE5071C-TDR2 Enhanced time domain analysisE5071C-010 Time domain analysisE5071C-790 Measurement Wizard Assistant softwareStep 5: Choose accessories (Optional)E5071C-1CM Rack mount kit,E5071C-1CN Front handle kitE5071C-1CP Rack mount and front handle kitE5071C-810 Adds a keyboardE5071C-820 Adds a mouseStep 6: Choose certification documentation(Optional)E5071C-1A7 ISO 17025 compliant calibrationE5071C-A6J ANSI Z540 compliant calibrationStep 7: Choose your warranty service(Optional)5 year return-to Keysight warranty and serviceDocumentationThe documentation for the E5071C is located in theOnline Help system for the E5071C ENA network analyzer.The ENA Service Guide and Online Help system are also availableon the Web site:www.keysight.com/find/enaAdditional product informationFor additional product information, refer to the ENAbrochure available on the Web site:www.keysight.com/find/ena