Menu
Key Digital KD-EXWPSTx Quick Setup Manual
Also see for KD-EXWPSTX: Manual
     |
2 1CONNECT:1. Connect video sources into the HDMI and USB-C input ports ofKD-EXWPSTx2. Connect video displays/projectors to the HDMI output port ofKD-EX18GRx (sold separately)3. If collecting IR control signals at the wall plate, connect an IRemitter to KD-EX18GRx’s IR Out port and apply the emitter head tothe IR sensor of the device you wish to control.4. Connect CAT5e/6 cabling from KD-EXWPSTx’s UHDoTP outputto KD-EX18GRx UHDoTP input. Ensure that the cable meets therequired minimum length of 17ft / 5m.5. Connect power. Screw-in power supply to the KD-EX18GRx unit,and then connect power to outlet.CONFIGURE:Configure KD-EXWPSTx with Key Digital Management Software™Pro (KDMS ™ Pro). Download HERE.1. Connect to KD-EXWPSTx from your PC using the USB micro porton the face of the unit. Open the KDMS™ Pro software and performa USB scan (fig. 1a). Choose “NO” and Start Scan when the USBDevice Scan prompt appears (fig. 1b)Quick Setup GuideBegin with the KD-EXWPSTx and KD-EX18GRx, all sources,display devices, audio system, and any other connectedperipherals powered OFF.133 2445Always follow the instructions provided in this Setup Guide. |
Related manuals for Key Digital KD-EXWPSTX
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved