Kentek KLD-6306 Instructions Manual

Kentek KLD-6306 Instructions Manual Manual pdf 2 page image

INSTRUCTIONSLASER SHIELDS Laser Safety EyewearKLD-6306PAGE 2 of 2EXPLANATION OF ANSI Z136 MARKINGSA B COD 7 @ 532nm VLT 30A. Optical Density (OD): minimum absorption value afforded by the frame and lens. (Logarithm to the base ten of the reciprocal of the transmittance.)B. Wavelength (nm) for which the eyewear protection is afforded.C. Visible Luminance Transmission (VLT %): The amount of visible light passing through a filter, weighted for the response of the human eye,expressed as a percentage.INSTRUCTIONS FOR SPARE PARTS: Included with your laser protective eyewear are these User Instructions and a storage case or eyewear protective bag. User Instructions are required tobe in both English and translated to the language predominantly spoken in the country the eyewear is shipped to. The storage case or eyewear protective bag is to be used when the laserprotective eyewear is not in use.INSTRUCTIONS FOR FITTING: When the eyewear is worn the eye should not be able to see outside of the protected lens or frame. The user should not be able to see the laser withoutprotection from the laser filter or frame. A user should not have more than 8mm or less between the user’s temple and frame. If the user is complaining about discomfort or eyewear is slipping,fogging or constantly needs to be readjusted this is a sure sign the eyewear does not fit properly. We suggest adding comfort or no slip pads or having a variety of frame styles available toachieve proper fit. Testing a secure fit by motioning the head up, down, side to side and simulation of the eyewear in use prior to the laser being on is important to ensure a proper fit. No oneframe fits all facial types. Frame features like adjustable, bendable temples and tilting eyewear fronts may help with fit. Proper fit is key, always confirm your eyewear and the eyewear of othersis warn properly prior to use.CLEANING INSTRUCTIONS: Use only mild soap, warm water and soft cloth to clean Kentek laser protective eyewear.DO NOT USE CLEANING SOLVENTSSTORAGE AND MAINTENANCE INSTRUCTIONS: When not in use eyewear should be stored in supplied protective case. Avoid extreme temperaturesof >105 degrees F (40.55 C) or <32 degrees F (0 C).EYE PROTECTOR MODEL:CE# Filter Color,Material ANSI Markings VLT % CE EN 207 Existing Markings OD and Transmission Curveamber,polymerOD 5+ @ 190-400nmOD 3+ @ 525-532nmOD 5+ @ 780-835nmOD 6+ @ 795-825nmVLT 36The Laser Protective Eyewear is constructed of premium laser protective materials, which have not been shown to have an expiration date with normalcare and use. Manufacturing Lot Numbers are marked permanently on the laser protective eyewear and included on the packaging case card.Transmission curves are included in the packaging and are available at https://www.kenteklaserstore.com.CE EN 207 products are compliant withthe regulation (EU) 2016/425. The EU Declaration of Conformity is attached or can be found at https://www.kenteklaserstore.com.This model is certified by CCQS Certification Services Limited., Block 1 BlanchardstownCorporate Park, Ballycoolin Road, Blanchardstown, Dublin 15, D15 AKK1, Ireland, Notified Body: 2834This model is manufactured by Kentek Corporation, 5 Jarado Way, Boscawen, NH 03303 USA.4260-1909 Rev. A.1Printed July 10, 2023 Copyright 2023 by Kentek Corporation. All rights reserved.5 Jarado Way . Boscawen, NH 03303 USA . 800-432-2323 . +1-603-223-4900www.kenteklaserstore.com . info@kenteklaserstore.com

/ 2

Related manuals for Kentek KLD-6306