KegLand BrewZilla 35L Instruction Sheet

KegLand BrewZilla 35L Instruction Sheet Manual pdf 2 page image

Page 2 of 29 http://www.KegLand.com.au Last Updated 12/01/2021 09:01 AMWARNING IMPORTANT INFORMATION!1. Please read this ENTIRE instruction sheet before using the BrewZilla unit. Ifyou are unsure about any part of using this brewery please refer to theYouTube videos that we have made or contact your local distributor.2. If the BrewZilla is damaged in any way do not use it. Contact your localdistributor.3. NEVER turn on the pump without attaching the recirculation arm shown instep 4 of the instructions. If you do not fit this arm you could be at risk ofspraying hot wort into the air causing injury.4. NEVER turn on the pump without first attaching the recirculation arm first.Also do not run the pump dry for extended periods. This can damage thepump.5. NEVER lift the BrewZilla when it is completely full, we strongly urge you touse a hose to fill your unit. Use the pump or ball valve to transfer your wort.Lifting a heavy / hot BrewZilla may result in serious injury. The newsecondary handle is for cleaning purposes only.6. If at any stage the recirculation arm is not fitted and/or needs to be removedalways ensure the ball valve is turned off (see instructions under theheading7. NEVER clear a blocked pump by spraying water down the recirculation armor directly into the pump inlet.8. Do not boil dry. Do not turn on the elements if there is less than 4 liters ofliquid in the boiler. This is the minimum fill level.9. Use only the recommended cleaners and sanitiser products listed in therecommended accessories section (p.20-22). Using chemicals not tested orrecommended on the BrewZilla can result in permanent damage and voidwarranty.If you require further assistance with chemical compatibilityplease contact