KBT chainset Instructions For Use Manual
2INSTRUCTIONS FOR USE ENSAFETY INSTRUCTIONS1. Please keep this instruction sheet safely for future reference.2. Inappropriate use or faulty application of the product is explicitly forbidden and absolves the manufacturer ofall liability.3. The use of the item is allowed only under continuous supervision by an adult. This product is suitable for indi-viduals weighing up to 100 kg.4. This product meets all security aspects of the European standards EN1176-1&2:2017. This product is fit foruse in commercial playgrounds, both indoor and outdoor. Due to the higher risk of vandalism, it is advisableto use the special needs swing ‘ropeset’ only in well monitored environments like for example schoolyards.5. The application of the item as part of a playframe or any other construction will have to be such that it excludesall risks of entrapment.6. The playframe or construction in which the item will be integrated, must also meet all relevant security aspectsof the European standards EN1176-1&2:2017.7. The minimum distance from the bottom of the swing seat (when not in use) to the ground surface should be35 cm.8. It is not advised to hang several swing seats to one swing construction.9. The minimum distance between the swing seat and the frame should be 20% of the chain or rope length plus20 cm.10. The critical free fall height equals the length of the chains or ropes divided by 2, plus the height of the swingseat at rest.11. When mounting or assembling the product, attention should be given that the impact area has the minimumrequired distance between the product and eventual obstacles: walls, fencing,… The free falling space shouldbe like specified by the grey area as shown in FIG I (see last page).12. In these safety areas no hard, angular or pointed objects should be present. The safety surface underneaththe product must be flat, and be covered in a suitable way (eg. rubber tiles, bark, wood chips). The productmust not be placed on asphalt, concrete or any other hard surface. There cannot be an overlapping of sur-rounding free spaces or safety areas.13. Swing frames or their top bar should only be attached to other equipment where specific measures are takento segregare them from other activities. For example: an additional 150 cm free space, barriers, ...14. Use swing hooks type 817.004 and a minimum beam thickness of 120 mm to attach these swing hooks to.15. See page 11 and 12 for the assembly:In general, the distance of the suspension points is at least the width of the swing increased by 5% of the sus-pension length. FIG II (see page 11).16. The special needs swing must be suspended with two separate swing hooks (type 817.004, one swing hookper suspension chain or rope) that are spaced according to the specifications in FIG II. The special needsswing can never be suspended on a single point suspension swing hook.17. When the suspension ropes of the special needs swing need to be changed (for instance due to damage),the bolt of the D-shackle of the suspension must be fastened and secured using thread-locking fluid.INSPECTION AND MAINTENANCEThe frequency of inspection and maintenance will vary with the type of equipment or materials used or otherfactors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of equipment, ...).Moving metal parts must be oiled regularly.Replacement parts should conform to KBT specifications. Check the levels of the impact attenuating surfaceswhen they consist of loose filling materials.Routine visual inspection (weekly to monthly)- Always check that the bolts and nuts are securely fastened.- Check the shock absorbing surface for objects that don’t belong there.- Check for missing parts.- Check the equipment ground clearances.Operational inspection (1 to 3 months)- Check the stability of the construction.- Check every part for excessive wear and replace when necessary.Annual inspection (1 to 2 times per year)- Check for rust and corrosion.- Check every part for excessive wear and replace when necessary.special needs swing ‘chainset’ & ‘ropeset’ |
Related manuals for KBT 127.010.00x.001
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved