Menu
Harrier 485V Owner's Handbook Manual
                                 | |
Contents
| 
SAFETY PRECAUTIONS- Always use fresh fuel. Stale fuel can block the carburettor and causeleakage.- Replace fuel tank and oil tank caps securely.A damaged cutterblade or loose fixing bolt are major hazards. Beforeuse, always visually inspect the cutting mechanism to ensure that it isin good condition. A damaged cutterblade must be replaced immedi-ately with a genuine Hayter replacement partDo not operate the engine in a confined space where exhaust fumes(carbon monoxide) can collect. Refuel outdoors only and do not smokewhile refuelling.Always pull the starter cord slowly until resistance is felt. Then pullthe cord rapidly to avoid kickback and prevent hand or arm injury.Mow only in daylight or good artificial light.Avoid using the mower on wet grass, where feasible.Always be sure of your footing on slopes.Walk, never run.Mow across the face of slopes, never up and down.Exercise extreme caution when changing direction on slopes.Do not mow excessively steep slopes of more than 20 degrees.Use extreme caution when reversing or pulling the mower towards you.Stop the engine before moving the mower across areas other than grass.Never operate the mower unless the guards are securely in position andin good condition.Do not change the engine governor settings or overspeed the engine.Disengage the rear roller drive clutch before starting the engine.Start the engine carefully, with feet well away from the cutterblade.1.6OperationPreparation |
Related manuals for Harrier 485V
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved