Haier LW110 User Manual

Language

English

Contents

English5

Français19

Español33

Haier LW110 User Manual Manual pdf 7 page image

1. Remove all packaging material. This includes the foam base and alladhesive tape holding the freezer accessories inside andoutside.2. Inspect and remove any remains of packing, tape or printedmaterials before powering on the freezer.• Your freezer is designed for freestanding installation only.It should not be recessed or built-in.• Place the freezer on a floor strong enough to support it fully loaded.• When moving the freezer, never tilt it more than a 45-degree angle.This could damage the compressor and the sealed system.• If the freezer is tilted let it stand in an upright position for at least 24hours prior to plugging. This is to allow the refrigerant to settle.• To assure your freezer works at the maximum efficiency itwas designed for, you should install it in a location where thereis proper air circulation, plumbing and electrical connections.• The following are recommended clearances around the refrigerator:Sides……………4" (102mm)Top....................4" (102mm)Back..................4" (102mm)Installing Your FreezerUnpacking Your FreezerAdjusting Your FreezerProper Air CirculationEnglish5

/ 44

Questions and answers

Heed help?

Ask question about this manual

Related manuals for Haier Access Plus LW110