Haier LET50C800HF Instruction Manual

The Timeshift function allows you to pause live TV and continue watching later. To use this feature, refer to the instructions provided under the 'Timeshift function' section of the manual.

It is advisable to disconnect the AC power cord from the AC outlet when the television receiver is not used for an extended period of time.

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

To select a different resolution on the Haier LET50C800HF, you need to access the preset mode settings. The manual does not specify the exact steps for changing the resolution, but typically this involves navigating through the menu options using the remote control or onboard controls.

In TV mode, press the CH+ or CH- buttons to change the channel up and down.

To manually tune analog TV channels, you can change the sound system to search for analog TV channels and fine-tune them. After selecting the desired channels, press the teletext red button to store them.

To record a currently watched digital program, insert your formatted USB storage device into the USB port on the side of your TV while in the DTV input source. Press the PAUSE button to start the Time Shift function, which will pause the program and begin recording it to the USB device. To stop recording, press the STOP button.

The following file formats are supported for USB playback: - Photos: JPEG (.jpg), BMP (.bmp), PNG (.png) - Music: MP3 (.mp3), WAV (.wav) - Text: TXT (.txt) - Movies: AVI (.avi), TS (MPEG2 & H.264)

This issue could be due to the antenna position, direction, or connection. Check these aspects to resolve the problem.

First, ensure that the power cord is properly inserted and the power switch is turned on. Additionally, check the contrast, brightness, volume setup, and press the standby key on the remote control for further inspection.