Haier LET32T1000HFM User Manual

To turn on the LED LCD TV, you need to locate the power button on the TV or use the remote control. Press the power button to turn on the TV.

If the TV does not turn on, check the power source to ensure it is properly connected. Also, verify that the power outlet is functioning by plugging in another device. If the issue persists, consult the troubleshooting section of the manual or contact customer support.

For any problems, refer servicing to the customer help line. Do not attempt to service the unit yourself as it could lead to injury or product damage.

To avoid damaging the LCD screen, do not use any abrasive cleaners and avoid contact with objects that may scratch the screen. Additionally, do not put the TV set near sources of humidity to reduce the risk of electric shock and fire.

It is advisable to disconnect the AC power cord from the AC outlet when the television receiver is not used for an extended period of time.

To clean the screen and cabinet of the Haier LET32T1000HFM TV, first remove the power cable from the power socket. Then, wipe the TV with a soft, dry, dust-free cloth.

The TV can be fixed onto a wall mounting bracket using four M6X13 screws via the four VESA standard holes on the back of the television.

To change the channel, press the CH+ or CH- button on the front control panel or the remote control while in TV mode.

The indicator LED on the front control panel will be BLUE when the TV is powered on and RED when the TV is in standby mode.

To start the auto tuning process, press the MENU button, navigate to the CHANNEL menu, and press the OK button. Then, select Auto Tuning and press the OK button. Follow the on-screen instructions to complete the tuning process.