Using the featuresDigital LED LCD Television Instruction Manual EN-22Entop half bottom half full screen. This feature isvery useful as it magnifies the image making thecharacters easier to read.Reveal Pressing the button will reveal hidden text. Thisfeature is used to reveal information such as answersto Teletext on-line interactive puzzles.Fast text coloured buttonsFast text automatically displays the four mostcommonly used pages that the broadcaster thinksthat you may want to choose next. Press the samecoloured button on the remote control as thecoloured link at the bottom of the teletext page to godirectly to that page.Subcode Pressing the button by entering its 4-digit numberto enter a secondary page.USB ModeNoteThe diagrams in the following section are schematic and only for your reference. Please seethe actual product if necessary.The OSD of the USB function may be somewhat example to help the instruction.To Use the USB DeviceSupported file formats:Photo: *. jpg;tMusic: *. mp3 files;tMovie: *. avi files;tTEXT: *. txttNoteDue to the particularity of file cording, some files may be unable to read.Supported equipment:Support the equipment that supports Mass StorageProtocol and whose file system is FAT32, suchas some USB disks, mobile harddisks, and MP3player. If USB equipment could not be identifieddue to unsupported file system, please format theequipment to the above-mentioned file system.To achieve smooth playing, ensure the following:The file code rate should be lower than 300KB/S;tDue to the limitation of USB signal transmissiontdistance, it is recommended not to use USB patchcord, in case of using the cord, make sure that itslength is not over 1m;Use high-speed USB equipment in conformitytwith USB2.0 full speed Interface Standard; If USBequipment does not comply with USB full speedInterface Standard, the playing may be unsmooth.Connecting a USB DeviceTurn the TV on.Connect a USB device containing photo, music and/When the USB is connected to the TV, then you canselect the Media Play.USB Media Menu operationPlug-in an external storage device into USB port.Press SOURCE button on the remote and press/ button to select USB.Press OK button on the remote to display the subpage.