About your LED LCD TVEN-11 Digital LED LCD Television Instruction ManualPreparation of YourRemote ControlBattery InstallationPlace the remote control face down, then open thecover of the battery compartment.Install two AAA batteries. (The + and - symbol of thebattery must match with the marks on the remote).Close the cover of the battery compartment.Battery CautionConfirm there is no object between the remote controland the remote sensor of the TV set.Sunshine or other strong light will interfere with thesignal sent by the remote control.Avoid using nearbyDo not put the remote control in direct heat or in a dampplace as you may damage the remote.Please use two AAA 1.5V batteries. Do not mix batterytypes. Install the batteries at the correct polarities. Donot use rechargeable batteries. If your TV is to be storedfor a period of time, remove the batteries from theremote control.Do not throw away the battery with common domesticaccording to local regulation.Getting StartedSetting upLocationYou will need to place your TV near your plug socket(so the power cable can comfortably reach) and withinreach of your aerial socket or extension lead.ConnectionInsert your TV aerial lead into the Antenna input atthe side of the TV.Insert the batteries into the remote control. Makesure they are inserted the right way around,matching the polarity as indicated inside the batterycompartment.Switching Your TV OnPress the POWER button on the right of the TVonce. A indicator light will appear in the right ofthe screen.Press POWER on the remote control. The TV will turnon. This may take a few moments, and this display willappear on the screen when the TV is turned on for thefirst time.Press OK button on the remote control to enter theBacklight Mode menu.