Haier LET26C400HF User Manual

The 26" LED LCD TV has a Full HD 1080P resolution.

To clean the TV screen and cabinet, first unplug the power cord from the receptacle. Then, wipe the TV with a dry soft cloth to remove dust or water drops.

During thunder and lightning, unplug the power cord and antenna cord to prevent damage to your TV.

To prepare the television for wall mounting, place the LED LCD Television onto a solid surface and protect the screen with some soft material. Then, remove the screws from the lower part of the television where the base joins to the TV, and take away the stand. Keep the stand safe for future use.

To turn off the TV, press the 'POWER' button on the remote control. This will set the TV to standby mode.

To display the TV menu, press the 'TV MENU' button on the remote control. This will allow you to navigate through various settings and options.

To access teletext, press the 'TEXT' button on the remote control. This will call or exit teletext modes and display a summary with a list of items that can be accessed. Each item has a corresponding 3-digit page number. If the selected channel does not broadcast teletext, the indication '100' will be displayed and the screen will remain blank. In this case, exit teletext and select another channel.

If the video becomes pixelated, it may be due to a low video bit rate. Ensure that the video bit rate is set appropriately to avoid this issue.

When the Time Shift feature is activated, only the PLAY/PAUSE/STOP/FWD/REV/VOL+/VOL-/MUTE keys and some basic operation keys (ENTER/EXIT/navigation keys) are available.

If the video playback is not smooth during Time Shift, ensure that the USB recording speed meets the minimum requirements. If the USB recording speed is not sufficient, the video playback may skip or be unsteady.