Haier LED TV LE32C13200 Owner's Manual

Also see for LE32C13200:

20[Background Color] – Set thebackground color: Automatic, Black,White, Red, Green, Blue,Yellow,Magenta, Cyan.[Background Opacity] – Setthe background opacity: Automatic,Solid, Flashing, Transparent,Translucent.[Edge Effect] – Set the edgeeffect: Automatic, None, Raised,Depressed, Uniform, Left Shadow,Right Shadow.[Edge Color] – Set the edgecolor: Automatic, Red, Green, Blue,Yellow, Magenta, Cyan, Black, White.9. HDMI CEC: This option isavailable only for HDMI sourcemode.Your Haier HDTV supportssome HDMI CEC (ConsumerElectronic Control) functions.When you connect another HDMICEC device (ex. Blu-ray player)to the TV, they can discover andcommunicate with each other. ThisTV supports the following HDMICEC functions: system standy, one-touch play, remote control passthrough, device menu control, anddevice list.[HDMI Control] – Enable orDisable the HDMI CEC functionControl.[Device Auto Off] – Enableor disable "Device Auto Off". Byenabling this menu option, turningoff the TV will command the CECenabled device connected to theHDMI input to Standby mode.[TV Auto On] – Set "TV AutoOn". Pressing the “Play” button onthe CEC enabled device (ex. Blu-ray player) will command it toplay, turn on the TV, and select theappropriate HDMI input.[Root Menu] – Accesses themenu of connected HDMI CEC-compatible device with the TVremote control.[Device List] – List the connectedHDMI CEC devices and theavailable functions.10. Input Labels: This option isavailable only for non-TV sourcemode.You can edit the input labelfor each non-TV source mode.11. Component Setting: This optionis only available in Componentsource mode.You can adjust thecomponent display settings: Phaseand Preset.[Phase] – Adjust the Picture Phaseto reduce Horizontal-Line noise.The tuning range is from 0 to 31.[Preset] – Restore the defaultcomponent setting values.12. MultiMedia Menu: This optiondisplays the photos (JPEG) or playsthe music (MP3) stored on a USBstorage device.Note: Only the first 1000 files arerecognized.The photos that can be displayedare limited:Minimum resoultion: 8x8Maximum resolution: 8000x6000There are three ways to enter theJPEG Viewer and MP3 MusicBoxinterface:(1)After plugging in a USB storagedevice into the USB port on theside of your TV, the MultimediaList menu will be displayed.

/ 32

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

When replacing the batteries in the remote control, ensure you use the same or equivalent type to avoid the danger of explosion. Do not expose the batteries to excessive heat, such as direct sunlight or fire.

If your TV falls down or if foreign materials get inside the TV box, you should unplug the TV immediately to prevent any potential damage or hazards.

To ensure the stability and safety of your Haier LED TV LE32C13200, do not apply excessive pull force to the front or top of the cabinet, as this could cause the TV to overturn. Additionally, avoid placing electronic equipment or toys on top of the cabinet to prevent potential damage and personal injury.

To turn on the Haier LED TV LE32C13200, press the Power key on the remote control or the front panel touch control keys. The TV will turn on within a few seconds.

The remote control of the Haier LED TV LE32C13200 requires 2 AAA 1.5V batteries.

You can connect a DVD player to the Haier LED TV LE32C13200 using either the HDMI port or the Component (Y/Pb/Pr with Audio L/R) input. For HDMI, simply connect the HDMI cable from the DVD player to the HDMI port on the TV. For Component, use the red, blue, and green cables for video and the red and white cables for audio, connecting them to the corresponding Component input ports on the TV.

To listen to music from a USB storage device, insert the USB device into the USB port on the TV. The TV should automatically detect the device and allow you to navigate to the MP3 files stored on it. Use the remote control to select and play the desired music files.

To turn the TV on and off, press the 'Power' button on the remote control. Note that the TV is never completely powered off unless physically unplugged.

To change the picture mode, press the 'PICTURE' button on the remote control. You can cycle through the available modes: Standard, Eco, Movie, Personal, and Vivid.

To lock or unlock the touch keys on the front panel, go to the 'Parental Control' settings and select the 'Button Lock' option. Set it to 'On' to lock the touch keys, which will allow the TV to be controlled by the remote control only. Set it to 'Off' to unlock the touch keys.

Related manuals for Haier LE32C13200