-5-Base Stand Assembly Instruction1. Place the TV with the display side down on a flat surface. Use a cloth to protect .the displayPosition the stand base plate onto the bottom of the stand pole.2. Attach the stand base plate to the stand pole by firmly tightening the supplied screw.Note: This stand is not a swivel stand. Do not attempt to rotate the TV.

-5-Base Stand Assembly Instruction1. Place the TV with the display side down on a flat surface. Use a cloth to protect .the displayPosition the stand base plate onto the bottom of the stand pole.2. Attach the stand base plate to the stand pole by firmly tightening the supplied screw.Note: This stand is not a swivel stand. Do not attempt to rotate the TV.

Safety and Warnings

Introduction

Base Stand Assembly Instruction

Stand Installation Guide

Installation

Remote Control

Change Password

Channel Menu

Operation

Trouble Shooting

DVD Operation

Misc Setup

DVD Trouble Shooting

Warranty

Haier LEC24B2380 User Manual

LEC24B2380


Contents Table of Contents2 Safety and Warnings3 Introduction5 Base Stand Assembly Instruction6 Stand Installation Guide6 Installation7 Installation10 Remote Control11 Operation12 Change Password13 Channel Menu15 Trouble Shooting17 DVD Operation18 DVD Operation19 Misc Setup19 DVD Operation21 DVD Trouble Shooting22 Warranty23	-5-Base Stand Assembly Instruction1. Place the TV with the display side down on a flat surface. Use a cloth to protect .the displayPosition the stand base plate onto the bottom of the stand pole.2. Attach the stand base plate to the stand pole by firmly tightening the supplied screw.Note: This stand is not a swivel stand. Do not attempt to rotate the TV. Previous Next / 23