Haier LEC24B2380 User Manual

Please refer to the 'Installation' section on pages 6-9 of the manual for detailed instructions on how to install the Haier LEC24B2380.

For instructions on using the DVD function, please refer to the 'DVD Operation' section on pages 17-20 of the manual.

If the power cord or plug of your Haier LEC24B2380 TV is damaged, you should refer all servicing to qualified service personnel. Do not attempt to repair it yourself.

Refer servicing to qualified service personnel. Do not open the cabinet as high voltages are used in the operation of this television receiver.

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls. Do not place your television on an unstable cart, stand, shelf or table.

You can connect your PC to the Haier LEC24B2380 TV using the VGA port for a wired connection. This will allow you to use the TV as a monitor for your PC.

If your TV is not responding to the remote control, ensure that the remote control sensor on the TV is not obstructed. Additionally, you can try using the side panel keys to turn the TV on from standby mode by pressing the 'STANDBY' button.

To power on the Haier LEC24B2380 TV, connect the included AC adaptor to the power input on the back of the set and plug the adaptor into an AC receptacle, ensuring the polarized plug is properly inserted.

The Haier LEC24B2380 TV offers several resolution settings, including 720*400, 640*480, 800*600, 1024*768, and 1280*1024, each with different vertical and horizontal frequencies.

The different rating categories available for parental control are: E (Exempt), C (Children), C8+ (Children over 8 years old), G (General), PG (Parental Guidance), 14+ (Over 14 Years), and 18+ (Adults).