Haier LE65S8000UG Owner's Manual

To connect peripheral devices, refer to the 'PERIPHERAL CONNECTION AND CONTROLS' section on page 5 of the manual for detailed instructions.

To unpack the Haier LE65S8000UG TV, follow these steps: 1. Place the carton on a flat surface. 2. Remove the carton’s buckle and then take off the carton’s cover. 3. Remove the protective materials around the TV. 4. Carefully place the TV face down on a soft, flat surface to prevent damage to the TV or scratching to the screen. It is recommended to have two people lift the TV set.

To turn on the Haier LE65S8000UG TV, first ensure that the stand is properly assembled and the TV is placed on a solid surface. Connect the antenna cable or cable TV cable to the ANT IN aerial socket on the back of the TV. Insert the 2 supplied AAA 1.5V batteries into the remote control. Plug the power cord into a working power outlet, and then press the POWER button on the remote control or the side control panel of the TV.

To adjust the volume, press the VOLUME UP/DOWN buttons while on the menu page. The left button decreases the volume, and the right button increases it.

To pair your Bluetooth remote control with the TV, follow the instructions for the remote control pair code. Once the code is successfully entered, you can use the Bluetooth remote control to operate the TV.

To access the settings menu, you can either press the menu button in live TV to display TV options, then select the settings menu and press OK, or press the circular settings menu icon and press OK.

To change the input source, go to the HOME interface, press the 'Inputs' icon, and then press OK to open the input source list. Use the up/down buttons to highlight the desired input and press OK to switch. Alternatively, under live TV, press the SOURCE button to display the list of input sources and select the desired source.

To adjust the brightness and contrast settings, press the / button to select the option. Press to decrease the parameter or press to increase the parameter.

To adjust the sound style, press the / button to select the 'Sound style' option, then press the OK button to enter the sub-menu. You can choose from options like user, Standard, Vivid, Sports, Movie, Music, or News.

To change the sound output to an external audio system, press the / button to select the 'Speakers' option, then press the OK button to enter the sub-menu. Choose 'External Audio System' from the options available.