Basic OperationBasic OperationPower on/off1. Connect the TV to a wall outlet using the included AC power cord.2.-To turn on the TVPress the POWER button on the TV or remote control.-To turn off the TVPress the POWER button on the TV or remote control.Input Source selectPress the INPUT button on the remote control to displaythe input source menu, and use the Ĥ / ĥthe remote control to select the input source. Press the OKbutton on the remote control to switch to the selected input.Note: Before you select the input source, make sure thecables are properly connected.14buttons onBasic OSD Menu operationPress the MENU button to display the OSD menu as shown below:Use the / buttons to select the main menu, and press the > or OK button to enter thesubmenu. In the submenu, use theĤ/ĥbuttons to select an option.Use the =!/ ? buttons to adjust a setting or change a selected option.Some options have a submenu. Use the OK button to access the submenu.* (Press the MENU or BACK button to return to the previous menu.)* (Press the EXIT button to exit the menu display.)Note1: Some options can only be accessed in certain modes.Main menuPicture, Audio,Channel, Setup,LockSubmenu(Picture menushown as anexample)ButtonsUse the buttons listed here to navigate the OSD menu.Ĥ ĥVGA