ConnectionConnectionAntenna (RF) ConnectionPower Cord ConnectionRFCoaxial Antenna CablePress the INPUT button on the remote control to display the input source menu, use the CHĤ ĥbuttons to select TVˈand then press the OK- Connect the TV to a wall outlet using the included AC power cord.- When you connect the power cord, the TV enters into standby mode and the LED indicatoron the front of the TV will be red.- Turn on the TV by pressing the POWER roVTn theonottub remote control, and the LEDindicator will be turn off.Wall jack with F-ConnectorExternal Antenna11Note: It is recommended to unplug the TV if it will not be used for a long time, such asduring a vacation.button to confirm.You will need to perform achannel scan to be able to view TV channels. Please see the auto scan section on page 17.AC POWER INHDMI2(MHL) HDMI3 USB RF IN