Haier LE55K5000TFNa Service Manual

The total power input for the Haier LE55K5000TFNa TV is 128W.

To connect an external audio receiver, you can use the OPTICAL audio output on the TV. This allows you to transmit digital audio signals to your receiver for enhanced sound quality.

The Haier LE55K5000TFNa uses an AC power source. It comes with an AC polarized line cord that should be used for operation.

If the unit is not operating normally, simply unplug the unit from the AC outlet and plug it back in. This should return the unit to normal operation.

The 5V_STB/1.4A component is likely a standby power supply that provides 5 volts of power at 1.4 amps. This component is essential for maintaining the TV's standby mode, allowing it to wake up quickly when turned on.

To select the operator and country for channel tuning, press the ▼ button and then use the ◀▶/▲▼ buttons to choose the desired operator and country. Press the OK button to confirm your selection.

To display the Wi-Fi password, move the cursor to select the 'Display Password' option and set it to 'On'. This will show you the Wi-Fi password.

The N+Smart function allows you to share content such as music, videos, or photos between compatible devices on a home network. To use this function, press the ◀▶ buttons to select the N+Smart menu, then press the OK button to enter the N+Smart application. From there, you can browse and access content from other devices on the network.

To enter the factory settings, press 'source-2-5-8-0' on your remote. To exit the factory settings, press the 'exit' key.

To restore the factory settings, go to the 'Init EEPROM' or 'Factory Rest' option in the factory settings and press 'OK'.