Introduction8- We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall toprevent cable interference.- Before mounting your TV on the wall, you need to remove the base if you attached it.- For your safety, please use only with UL listed wall mount brackets that can support theweight of the TV without stand: 31lbs (42") / 36lbs (46").3. Instruction for Wall MountA wall mount kit (purchased separately) will allow you to mount your TV on the wall.For detailed information on installing the wall mount, refer to the instructions providedby the wall mount manufacturer. It is strongly recommended to contact a technicianfor professional assistance for wall mount installation.HAIER is not responsible for any damage to the product or injury to yourself or othersresulting from wall-mounting.- Please insert the screw accessory into the wall mount hole before fastening thescrew.- Do not mount your TV at more than a 15 degree tilt.- Always use at least two people to mount the TV to a wall.- Do not install your Wall Mount Kit while your TV is turned on. It may result inpersonal injury due to electric shock.- 4 pcs of type M6 screws are required for installing the wall mount bracket toyour TV. Do not use screws that are longer than 30 mm. Screws that are toolong may cause damage to the inside of the TV set.- Do not fasten the screws too tight for this may damage the TV or cause theTV to fall, resulting in personal injury. HAIER is not liable for these kinds ofincidentsDimensions for Mounting Hole Pattern400mm400mm- This TV is compatible with a 400mm x 400mm mounting hole pattern.