Haier LE50K9000UA User Manual

Contents

In this menu,you can pair Bluetooth devices.1.Press the "RED" and "BLUE" buttons at the bottomof the remote control for 5 seconds.2.When the LEDsend the pairing signal to the TV anddisplay the information of the remote control onthe right side of the screen.3.Press the OK button to display the5.pairing.If the paired is displayed, the connection issuccessful.4.If the couldn't pair appears, the connection fails.Wait 30 seconds and then press the "RED" and"BLUE" buttons at the bottom of the remote controlfor 5 seconds to repeat the previous steps.Press EXIT or BACK button return to the previousmenu.REMOTE&ACCESSORIES16ADD AND USE OF MULTI MEDIA PLAYER1. In the HOME interface, select the + icon in the APPcolumn to add the application, and click OK. Press upand down to select the MultiMediaPlayer application,and click OK to add it to the HOME interface.2. Select OK key to enter Multi Media Player and displayThe menu may be different depending on when youpurchased the TV.NOTE

/ 22

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

The operating instructions for the Haier LE50K9000UA can be found on page 6 of the user manual.

To turn on the Haier LE50K9000UA TV, first ensure the stand is installed and the TV is placed on a solid surface. Then, connect the antenna cable or cable TV cable to the ANT IN aerial socket on the back of the TV. Finally, plug the power cord into a working power outlet and press the power button on the remote control or the TV itself.

To turn on the TV using the buttons on the device, press the middle button when the TV is in standby mode.

To connect a DVD player to the Haier LE50K9000UA TV, you can use the YPbPr (Component) input terminal. Connect the corresponding cables from the DVD player to the YPbPr input on the TV.

To play a multimedia file, press the 'play' button on the remote control.

To set up the basic settings on your Haier LE50K9000UA TV, follow the Text Tip for First Time Setup. This will guide you through the initial configuration process.

To switch between different input sources, you can either go to the HOME interface, press the 'Inputs' icon, and select the desired input, or press the SOURCE button under live TV to display the list of input sources and select the desired source.

To adjust the brightness and contrast settings, press the / button to select the option. Press to decrease the parameter or press to increase the parameter.

To adjust the sound settings, navigate to the 'Sound' menu. Use the / button to select the desired option (e.g., Sound style, Balance, Bass, Treble, Sound Surround, Equalizer Detail, Speakers, Digital Output, SPDIF Delay, Auto Volume Control, Downmix Mode) and press the OK button to enter the sub-menu. Use the / button to decrease or increase the parameters as needed.

To reset all sound settings to the factory defaults, navigate to the 'Sound' menu and select 'Reset to Default'. Press the OK button to confirm and reset all settings to their original factory defaults.

Related manuals for Haier LE50K9000UA